Custom Sheet Metal Stamping Services sheet metal stamping

Custom Sheet Metal Stamping Services

CNC punching and stamping services for sheet metal components. Amada turret punch press and TRUMPF TruMatic 6000. Formed features, louvers, extruded holes and ribs in a single setup. IATF 16949 certified.

Send RFQ File

Product Detail

Custom Sheet Metal Stamping & CNC Punching Services

Louvers, extruded holes, ribs, embosses, countersinks β€” formed features are what turn a flat panel into a functional part. Our CNC punching and stamping service delivers them in a single machine setup, on equipment built for the job, with feasibility reviewed before you commit.

The pain point: formed features that multiply operations, cost and lead time

When your supplier cannot form features in-house, every louver, extruded hole or rib becomes a separate secondary operation at another vendor β€” new handling, new fixturing, new freight, and another queue in front of your delivery date. Re-fixturing is not just slow; it is inaccurate. Each transfer between operations re-introduces alignment error, and feature placement that was consistent on the first-off sample drifts across the production batch. You find out when panels arrive with louvers off-grid or extruded holes that no longer match the hardware β€” and the correction loop starts again across two suppliers.

Worse still is discovering a tooling gap after the purchase order: a feature your supplier cannot punch with available tooling turns into an emergency redesign or an outsourced workaround, priced at your urgency.

Our solution: form everything in one setup, and check feasibility before quoting. Our facility operates both the TRUMPF TruMatic 6000 β€” a combined laser cutting and punching machine β€” and an Amada turret punch press with a large-capacity turret, so formed features and cut contours come off the same machine. Every drawing is reviewed for punch tool availability and forming feasibility before quoting, so you know what can be produced β€” and what cannot β€” before you commit.

Equipment & specifications

ParameterSpecification
Primary machinesTRUMPF TruMatic 6000 (combined laser + punch); Amada turret punch press
Punching capabilityLarge-capacity turret with multiple tool stations; minimal setup changeover
Formed featuresLouvers, extruded holes, ribs, embosses, countersinks, V-cuts
Special processingV-cut technology, scrap suction, energy-saving operation
Material rangeMild steel, stainless steel, aluminum, galvanized sheet
Combined operationsLaser cutting and punching on the same machine (TruMatic 6000)

How this protects your schedule and your batch quality

  • Fewer operations, lower per-part cost: forming features during punching eliminates secondary operations, reducing handling time and cost per part.
  • Pre-production feasibility review: our engineers check tool availability and forming limits before quoting β€” you receive a manufacturability assessment with the quote, not surprises after the order.
  • Prototype-to-volume consistency: the same machines, tooling and inspection criteria apply whether you order 10 panels or 10,000.
  • One-stop supply: stamped and punched parts flow directly into bending, welding or assembly in-house β€” no second supplier to coordinate.
  • Documentation that passes incoming inspection: FAI reports, dimensional inspection and QC photo packs travel with every shipment.

V-cut technology and bend preparation

V-cut processing prepares bend relief and fold lines, improving bend accuracy and reducing cracking at bend lines β€” a detail that matters most when punched panels move straight into bending. Because punching and bending share the same facility, bend relief is planned with the bend sequence in mind, not added as an afterthought downstream.

Typical applications

  • Electrical enclosures: ventilation louvers, knockouts and mounting features punched in one setup.
  • Machinery panels: brackets, stiffening ribs and embossed alignment features.
  • Industrial equipment housings: countersinks, extruded holes for hardware and formed flanges.
  • Automotive components: brackets, reinforcements and structural panels with formed features.
  • Prototype to volume: same tooling and process from first-off samples to production runs.

Frequently asked questions

What is the difference between stamping and CNC punching?

Stamping typically uses dedicated dies for high-volume parts, while CNC punching uses programmable turret tooling for flexibility across different part designs. We offer both: the Amada turret punch for flexible, multi-feature parts and the TRUMPF TruMatic 6000 for combined laser cutting and punching.

Can you produce parts with both cutouts and formed features?

Yes. The TruMatic 6000 combines laser cutting and punching in one machine, so complex contours are laser-cut while formed features β€” louvers, extruded holes, ribs β€” are punched in the same setup.

What sheet thicknesses can you handle?

Specify your material type and thickness in the inquiry. We work with mild steel, stainless steel, aluminum and galvanized sheet, and will confirm machine capability against your requirements.

Do you provide tooling for custom formed features?

Our turret punch presses carry a range of standard tools. For custom features, our engineering team assesses tool availability during the drawing review and advises on any tooling requirements before quoting.

How do I get a quote?

Send your drawings (STEP, IGES, DWG or PDF) with material specifications, sheet thickness, quantities and any feature requirements. Our engineering team will review them, confirm feasibility, and return a quote-ready technical file.

Ready to Discuss Your Stamping or Punching Project?

Send your drawings and requirements β€” our engineering team will respond with a manufacturability assessment covering tool availability, forming feasibility and a quotation.

Request a Quote

Tags

Related Products

Send RFQ File

β–Έ QUOTE REQUEST

FORM Β· REV.1