
Custom Sheet Metal Enclosure Fabrication
Complete sheet metal enclosure fabrication β laser cutting, punching, bending and welding in one facility. Electrical cabinets, control panels, equipment housings. IATF 16949 certified.
Send RFQ FileProduct Detail
Custom Sheet Metal Enclosure Fabrication β From Drawing to Delivery
An enclosure is more than a box. It protects your equipment, manages thermal loads, provides mounting for components, and is often the first thing your customer sees. Our enclosure fabrication service combines laser cutting, CNC punching, bending and welding under one roof β so you get a complete enclosure from a single responsible supplier.
The pain point: when your enclosure has four suppliers, nobody owns the result
An enclosure is a system part: the laser-cut blank must fit the bent flanges, the bent shell must accept the welded corners, and the welds must not distort the mounting faces your components bolt onto. When cutting, forming, welding and finishing are split across different vendors, every interface becomes a negotiation. One supplier's tolerance stack becomes another supplier's assembly problem; partial assemblies wait in logistics while the rest of the enclosure is still being made; and when the finished enclosure does not close cleanly or the mounting holes miss by a margin, you spend your project week chasing three companies to find out whose drawing revision everyone actually worked from.
The procurement impact goes beyond frustration: coordinating tolerances across suppliers multiplies the chances of a mismatch, split logistics adds freight and handling damage risk, and accountability gaps turn every defect into a dispute β while your equipment sits unassembled and a project milestone slips. For importers, distributors and EPC buyers managing many parallel projects, one unreliable enclosure supplier consumes disproportionate management time.
Our solution: one facility from flat sheet to finished enclosure. Cutting, forming, welding and inspection share one quality standard, one timeline and one point of contact. Design feedback happens at one desk instead of by email chain, interfaces between processes are handled by the same team, and when you have a question, there is one party responsible for the answer.
What our enclosure service includes
| Stage | Process |
|---|---|
| Design review | Drawing review, tolerance risk assessment, manufacturability feedback |
| Blanking | Laser cutting (TRUMPF TruMatic 6000) or CNC punching (Amada) |
| Forming | Press brake bending for flanges, channels and box shapes |
| Joining | Welding (MIG/TIG/spot) for corner joints, internal brackets and structural integrity |
| Inspection | First-article inspection, dimensional check, QC photo pack |
| Documentation | Material certificates, inspection records, shipment checklist |
Why source enclosures from us
- Single-source responsibility: cutting, forming and welding in one facility means one quality standard, one timeline and one point of contact. No finger-pointing between suppliers.
- Pre-production drawing review: we assess your enclosure design for manufacturability β bend accessibility, weld joint access, tolerance feasibility β before quoting, when changes are still cheap.
- Sample gate approval: we produce a sample enclosure for your approval before volume production. Design changes are easier and cheaper at this stage than after a container has shipped.
- Export documentation as standard: material certificates, FAT records, QC photo packs and shipment checklists are prepared for every order, supporting your incoming inspection instead of leaving it to chance.
- Certified quality system: the entire process β from drawing review to shipment β operates under our IATF 16949:2016 certified quality management system.
Customization and production flexibility
Internal brackets, mounting plates and component supports can be cut, formed and welded as part of the complete enclosure package β not quoted out to a third party. We support both one-off prototypes and recurring production batches; share your annual volume estimate and we will plan production and capacity around it. Surface treatment options depend on material and application requirements β specify your finish requirements at quoting stage and we will confirm what we can provide in-house.
Typical enclosure types
- Electrical and control cabinets
- Equipment housings and covers
- Operator console enclosures
- Instrumentation panels
- Custom machinery guards and shrouds
Frequently asked questions
Can you work from our existing enclosure design?
Yes. Send your drawings and we will review them for manufacturability β bend accessibility, weld joint access and tolerance feasibility. We can also suggest design refinements that reduce cost or improve producibility.
Do you include internal mounting brackets and features?
Yes. Internal brackets, mounting plates and component supports are cut, formed and welded as part of the complete enclosure package, in the same facility as the enclosure itself.
What surface finish options are available?
Surface treatment options depend on the material and your application requirements. Specify your finish requirements at quoting stage and we will confirm what we can provide β including powder coating and anodizing, which run in the same facility.
Can you supply enclosures in batches for ongoing production?
Yes. We support both one-off prototypes and recurring production batches. Share your annual volume estimate so production can be planned with capacity reserved for your program.
What documentation comes with the shipment?
Material certificates, inspection records, QC photo packs and shipment checklists are prepared as standard, and production runs under our IATF 16949:2016 certified quality management system.
Get Your Enclosure Fabrication Quote
Send your enclosure drawings, material specifications and any finish requirements β our team will review the design, assess manufacturability and provide a complete quote package.
Request a quote



