Custom CNC Machined Parts

Custom CNC Machined Parts for Industrial Equipment

ChunTian machines custom parts from your drawings and 3D models, combining milling, turning and inspection under one roof. The drawing review establishes which features need which process before a quotation is issued.

Request a quote View CNC solutions

Manufacturing since: 2009
Core processes: Milling, turning, inspection
Quality system: IATF 16949:2016

Buyer pain points

Where CNC Machined Part Orders Go Wrong

Machined parts hide their problems inside: dimensions that drift between batches, stresses that move after machining, and records nobody kept.

Batch-to-batch dimensional drift

Impact on your project: Later lots fail incoming inspection even though the sample passed.

Without stable fixturing and in-process checks, dimensional consistency depends on the operator's day.

Distortion after machining

Impact on your project: Thin walls and precision features move after the part leaves the machine.

Internal stresses and aggressive setups distort thin-wall and precision parts after finishing.

No dimensional records for critical parts

Impact on your project: Incoming audits stall without measurement records to show.

Regulated buyers need dimensional evidence that many shops cannot provide.

How We Solve It

Precision work at Chuntian is planned around stability: fixturing, inspection, and finishing are part of the route.

Stability-first process planning

Fixturing, clamping, and tool paths are planned for tolerance-critical and thin-wall features.

In-process dimensional checks

Critical dimensions are checked during the run and recorded, not only at the end.

Finishing integrated into the route

Deburring and edge condition are part of the machining route, so parts arrive ready for assembly.

What this means for you

Machined parts that repeat batch to batch, hold their shape, and arrive with records you can show.

Application cases

Typical CNC Machined Part Projects

Representative project types produced on our lines. Share your drawings for a project-specific review.

Typical application example

Precision fittings and connectors

Machined fittings produced in repeat batches with recorded critical dimensions.

Machined housings and mounts

Housings and mounting parts machined from specified alloys with controlled edge finish.

Company strength

Who You Are Buying From

Zhuhai ChunTian Machine Technology Co., Ltd. has manufactured precision sheet metal parts and CNC machined components since 2009 in a full-range fabrication facility serving machinery importers, distributors, and EPC buyers worldwide.

Established

2009

Manufacturing experience

16+ years

Team size

300–1,000

Annual revenue

USD 30M–150M

Certifications on file

IATF 16949:2016, ISO 9001, ISO 14001, ISO 13485:2016, ASME authorization, and National Board registration. Certificate copies are available on request.

Production lines & equipment

Laser cutting and punching centre (TRUMPF TruMatic 6000), Amada CNC turret punch press, bending, and robotic welding cells for laser, arc, TIG, MIG, and spot welding. Engineering support covers drawing review, DFM recommendations, and tolerance risk assessment.

Partners & export markets

Long-term supply relationships with machinery importers, distributors, and EPC buyers across global export markets. Capacity and lead times are planned per project — share your drawings to receive a schedule.

Capability matrix

What we can do to a machined part

The four families below cover most custom machined parts. Which ones apply depends on the geometry, the material and the quantity required.

Milling

3-axis, 4-axis and 5-axis milling for pockets, profiles and complex geometry.

Turning

Turning for shafts, bushings and rotational features, including Swiss-type work for small parts.

Inspection

Dimensional inspection against the drawing, with results recorded for the buyer.

Finishing

Deburring and surface treatment to protect the part and meet the specified finish.

Selection guide

Match the machining route to your part

The same part can be machined in different ways. Switch between the options to see what each route changes.

Rotational geometry

Parts whose main features are rotational are usually turned. Diameter, length and thread specification determine the machine and the setup.

Diameter and concentricity tolerances are confirmed against the drawing before quoting.

State the critical diameters and any thread specification.

Typical applications

Where custom machined parts are used

The examples below describe typical application types, not specific customer projects.

Typical example

Shafts and bushings

Rotational parts that transmit motion or locate other components inside an assembly.

Typical example

Housings and covers

Machined bodies that enclose or support moving parts and provide mounting surfaces.

Typical example

Fixtures and tooling

Plates, blocks and locating features used to hold parts during production.

Production floor

Equipment behind the parts

Machining and fabrication run on the same production floor, so a part that needs both processes stays on one process route and one inspection record.

Founded

2009

Employees

300-1000

Annual revenue

USD 30-150 million

Key equipment

TRUMPF TruMatic 6000

Laser Cutting Centre Zhuhai ChunTian Machine Technology Co.,Ltd. factory

Quality and certification

Documented quality, not verbal assurance

Certificates below are held by Zhuhai ChunTian Machine Technology Co.,Ltd. Each covers a defined scope; buyers should confirm that the scope matches their own requirement.

IATF 16949:2016

Automotive quality management system certification.

ISO 9001

Quality management system certification.

Certificate held by the company; confirm scope for your application.

ASME

Authorization held by the company; confirm scope for your application.

How an order runs

From drawing to shipment

Drawing review

We read the drawing and 3D model and identify features that need clarification.

Manufacturability feedback

Where a feature is difficult or costly to machine, we flag it and suggest an alternative.

First article

A first article is produced and inspected before the batch is released.

Inspection record

Inspection results and QC photo packs are prepared for the buyer.

Shipment

Parts are packed against a shipment checklist before dispatch.

Buyer questions

Questions buyers ask before ordering

Which tolerances can you hold on machined parts?

Achievable tolerance depends on the feature, material and part size. Tell us which dimensions are critical and we will confirm what the process route can hold for your part.

Which metals do your CNC machining services cover?

Common metals including aluminium, stainless steel and brass. State the grade on your drawing; if you have not fixed a grade, describe the service conditions and we will discuss options.

Can you apply a specified surface finish?

Finishing is applied where the drawing specifies it. State the finish and any standard it references so it can be included in the quotation.

Do you machine small batches as well as production runs?

Both are handled. Tell us the expected quantity at enquiry stage, because it affects the setup and the process route we recommend.

What records accompany machined part deliveries?

Machined deliveries carry inspection records for critical dimensions and QC photo packs prepared as part of the pre-shipment workflow.

Machined products we supply

Custom CNC Milling Services

Custom 3-axis CNC milling services for precision machined components. Vertical milling for brackets, enclosures, fixtures and heat sinks. IATF 16949 certified facility serving global machinery buyers.

RangeMOQ

Custom 5-Axis CNC Machining Services

5-axis CNC machining for complex geometries - turbine blades, impellers and structural brackets. Single-setup precision with 0.005 mm accuracy. IATF 16949 certified.

RangeMOQ0