
Custom CNC Turning Services
Precision CNC turning services for shafts, pins, bushings and rotational components. IT6-IT7 tolerance with SPC data and first-article inspection for export-grade B2B supply.
Send RFQ FileProduct Detail
Custom CNC Turning Services for Precision Rotational Components
CNC turning is fundamental to producing shafts, pins, bushings, flanges and other rotational parts that demand tight concentricity and surface finish control. At Zhuhai ChunTian, our turning capabilities cover both bar-fed production for high-volume small-diameter parts and chucking operations for larger custom components β with a documented workflow behind every batch.
The pain point: turned parts that look fine and fail in your machine
Rotational parts hide their defects until they rotate. A shaft with marginal concentricity passes a visual check, passes a dimensional spot check on diameter β and then runs out in your assembly, where the misalignment shows up as vibration, accelerated wear on mating parts, or a bearing seat that will not fit without rework. A bushing batch with drifting internal geometry fails the same way: late, in assembly, and expensive. And when the supplier ships production batches without measurement data, your incoming inspection is left with two bad options: slow every delivery down with 100% verification, or accept undocumented parts and hope.
The procurement impact is a slow leak: assemblies that rework quietly, tolerance disputes that are impossible to settle without data, and repeat orders placed on trust because the first batch came with no evidence either way.
Our solution: measurable tolerance, documented batches. We work to IT6βIT7 tolerances as standard, with SPC data collection and first-article inspection (FAI) generated for production runs β so dimensional traceability arrives with the parts, not on request. Every project goes through drawing review and tolerance risk assessment before production, and material test certificates are available with your order. What your quality team receives is evidence, not assurances.
Machining capabilities & specifications
| Parameter | Specification |
|---|---|
| Configuration | CNC turning (bar-fed and chucking operations) |
| Tolerance range | IT6βIT7 as standard; tighter tolerances subject to geometry review |
| Surface finish | Down to Ra 0.8 Β΅m with appropriate tooling |
| Inspection method | SPC data collection, first-article inspection (FAI), dimensional verification |
| File formats accepted | STEP, IGES, XT, DWG or solid model files |
What we turn
| Component type | Typical applications |
|---|---|
| Shafts and stepped shafts | Motors, pumps, gearboxes, transmissions |
| Pins and dowels | Locating, hinge, pivot, assembly alignment |
| Bushings and sleeves | Bearing seats, guide bushings, spacer sleeves |
| Flanges and collars | Pipe connections, mounting hubs, stop rings |
| Threaded components | Custom fasteners, adapters, threaded shafts |
| Custom rotational parts | Per buyer drawing or sample |
Materials for CNC turning
| Material category | Grades | Typical use |
|---|---|---|
| Aluminum alloys | 6061, 7075 | Lightweight shafts, spacers, housings |
| Stainless steel | 304, 316, 17-4PH | Corrosion-resistant pins, bushings, fittings |
| Carbon steel | 1045, 1060, Q235 | Shafts, couplings, structural pins |
| Tool steel | H13, D2 | Wear components, guide pins, tooling |
| Brass | Various | Valve bodies, fittings, electrical components |
| Engineering plastics | Various | Insulating bushings, low-friction sleeves |
Material test certificates (mill test reports) can be provided with your order. Specify material grade and any certification requirements in your inquiry.
Turning combined with milling β in the same facility
Depending on part geometry, turned parts can be supplied with milled features β flats, keyways, cross-holes β without transferring to a separate facility. Both CNC turning and CNC milling run in-house, which removes the classic handoff problem on compound parts: no re-fixturing at a second shop, no split accountability for the final geometry. Because we also handle sheet metal fabrication and welding, turned components can be supplied as part of larger welded or sheet metal assemblies.
Frequently asked questions
What file formats do you accept for CNC turning?
STEP, IGES, XT, DWG or solid model files. For threaded features, specify the thread standard (metric, UN, etc.) and tolerance class. Send your CAD model and we will review it for manufacturability.
What is your typical tolerance for turned parts?
We work to IT6βIT7 tolerances as standard. Tighter tolerances may be achievable depending on geometry and material β specify your requirements in the inquiry and our engineers will confirm feasibility.
Do you provide measurement data with production batches?
Yes. SPC data and first-article inspection reports are generated for production runs, and material test certificates are available on request. Specify documentation requirements in your purchase order.
Can you supply turned parts with milled features?
Depending on part geometry, yes. Our facility handles both CNC turning and CNC milling in-house, so flats, keyways and cross-holes can be added without a second supplier.
Can turned parts be supplied as part of a larger assembly?
Yes. Because we handle sheet metal fabrication, welding and CNC machining under one roof, turned components can be supplied as part of welded or sheet metal assemblies β reducing your supplier coordination effort.
Ready to Discuss Your CNC Turning Project?
Send your drawings with material specifications and tolerance requirements β our engineering team will respond with a manufacturability assessment and quotation.
Request a Quote



